F1 Professional Foam Cannon (2024)

FAQs

Why do detailers use foam cannons? ›

The thick foam created by a foam cannon not only provides longer dwell time for the cleaning agents to loosen and remove any dirt build-up on your vehicle, but the foam also provides extra lubrication to make washing a finish in pristine condition safer by reducing the potential for wash-induced swirls and scratches.

If you only wash your vehicle a few times a year, it might not be worth the up charge over a bucket and sponge. But if you clean it weekly or even monthly, a foam cannon will save you time and likely deliver a deeper clean due to the extra suds you can get compared to hand washing.

The MJJC Foam Cannon Pro V3. 0 represents the pinnacle of the brand's commitment to innovation and quality. This latest iteration boasts significant design improvements over its predecessors, making it one of the most user-friendly and efficient foam cannons on the market.

In many cases, you don't need to scrub vigorously after using a pressure washer foam cannon. The foam generated by the cannon is designed to encapsulate dirt and lift it off the surface, making it easier to rinse away with the pressure washer.

A Foam Gun can be used by connecting to a regular water garden hose but Foam Cannon needs to be connected to a pressure washer. Foam Cannon provides more suction power than foam guns do.

Spray your car liberally with foam and let it sit for 2-3 minutes. Use your foam cannon to spray on a thick layer of suds to your vehicle, working from top to bottom. Cover every inch of your car with soap, and let the solution sit for at least 2-3 minutes.

Electric pressure washers are great because they are quieter, smaller, and easier to move around than gas pressure washers. However, gas pressure washers typically offer more PSI and GPM, and thus deliver thick foam and a safer wash.

MTM IS THE INDUSTRY'S LEADER IN FOAM CANNONS. If there is something synonymous with foam cannons it is MTM. MTM has been the leading manufacturer of the finest foam cannons for years and are considered the best foam cannons by many pros. The MTM PF22.

The main difference between foam cannons and foam guns is that cannons are used with pressure washers, while guns attach to a standard garden hose. Many favor foam guns for convenience; others prefer cannons for their stronger cleaning power.

A pressure washer with sufficient volume and pressure – Foam cannons generally require a minimum of 1100 PSI and 1.5 GPM output, though higher quality and performance foam cannons will usually require 1500 PSI minimum with 2 GPM output, typically the maximum PSI will be around 5000 PSI and 5 GPM but this can vary ...

How do you get the best results from a foam cannon? ›

Follow these steps to enjoy the benefits of washing with your foam cannon: Ensure you have a pressure washer with a GPM of at least 1.5 and a PSI of at least 1100, mix a proper solution of soap to water in the canister, screw the canister back onto the brass connector, attach the pressure washer to your foam cannon's ...

Although there are a number of car wash soaps on the market specifically formulated for use with foam cannons (Griot's Garage Foaming Surface Wash & Tornador Sudsy are both great) reality is most good quality car wash soaps will work quite well in a foamer.

PICKING THE BEST FOAM CANNON SOAP

1. pH Balanced: Harsh acid and alkaline detergents can strip your wax protection or cause damage to your painted surfaces, polished aluminum / chrome, or trim. Soaps that are pH balanced will be gentle on your surfaces while providing a deep level of clean.

If this is your first time using a snow foam cannon or the foam gun on your pressure washer, it can be a challenge to get the right snow foam consistency. We recommend starting with a baseline mixture of 1:16, that is, 1 part concentrate to 16 parts water. Dirtier vehicles might benefit from 2:16 or 3:16 mixtures.

With a dedicated Foam Cannon soap your car wash process is both quicker and more effective. The specially designed cleaners work to loosen and remove contaminants before you wash, so there is both less time and effort needed to clean your vehicle than before.

Snow foam got its name from how it appears like a layer of fresh snow on your car. Unlike the cold stuff, snow foam leaves your car cleaner. Still, most snow foam products are not car shampoo. Snow foam is an essential pre-wash, improving car wash results and keeping your finish brighter for longer.

Foam guns are worth it because foam helps the soap cling to the surface longer, giving you more working time before it dries or drips off of your vehicle. It also helps you see clearly where you've already scrubbed with your microfiber wash mitt or brush.

Starting on the lower sections and rear of the car, working your way around the car, from the bottom to the top, allowing the foam a longer dwell time on the dirtier lower areas. Let the foam sit and do its work for 4 to 5 minutes, gently dissolving the grit and dirt from the surface.